Tennis racket head stickers, protect the surface of the tennis racket head, prevent paint drop and accidental bumps
Name: protection tape
Material: 100% polyester
Length: 5000CM, width 3.5CM
A single racket requires 400MM head stickers, which can stick 12-13 tennis rackets; the material is soft, has good ductility, and is easy to stick and flat wear; the inner layer has moderate viscosity, easy to tear, and does not leave sticky marks.
The role of the frame protector: When the outside of the frame is rubbed against the ground, it is protected from damage. Usually it is made of very wear-resistant materials, and its price is much lower than the price of the frame, so it can be replaced frequently For example, the relationship between the frame protector and the frame protector is like the relationship between the outer handle and the inner handle.
When attaching the frame protector, first clean the position to be applied thoroughly; then start from the 1 o'clock or 2 o'clock position of the frame, and paste it along the upper edge of the frame to the 11 o'clock or 10 o'clock position Location, the protection range of the frame protector usually does not exceed 3 o'clock to 9 o'clock;
Then squeeze the protective sticker along the racket guard frame to tightly integrate it with the protective frame; in addition, it is important to note that when sticking the protective sticker, the protective frame must be completely covered, because the part where the protective frame is set is often the most Parts that are prone to "injury".